How to equip a plasterboard suspended ceiling

The scope of drywall panels is incredibly wide. Including, with their help it is possible to equip a suspended ceiling. This design allows you to mask the flaws present on the ceiling surface, increase the heat and sound insulation of the ceiling, and generally improve the interior design. It remains to understand how to create such a design. And here you need to consider the following.

1. Preparation for the main work

At the preparatory stage, marking is required. With its help, determine at what height the zero level of the ceiling will be. Most often, markings are applied about 20 cm below the rough surface. The marking should go along all the walls of the room, creating a closed loop. Although, if the ceiling is high, you can arrange a zero level at any desired height.

2. Installing the frame under the drywall

The frame structure consists of two main elements: suspensions and guide profiles. To install the suspensions, the ceiling will have to be delineated with a grid. The strip spacing in this case is determined individually. Usually it is from 50 to 100 cm. As a result, "nests" are formed.

Suspensions are installed at the intersections of the strips, adjusting them in height according to the marking indicating a zero level. After installing the suspensions, the guide profiles are fastened. The whole structure is lightweight because the elements are usually made of aluminum. But due to the mesh structure, the frame is also very reliable.

3. Installation of drywall panels on the frame

The formed frame structure remains to be filled with plasterboard panels. Drywall can be mounted in different ways. It can be installed both from the outside of the frame and from the inside.

For apartments and houses, the first option is much more suitable. In this case, plasterboard panels of a large area are used, which are simply attached to the guide profiles with self-tapping screws. In addition, then with a drywall, you can also lay a heat-insulating layer.

4. Putty joints in drywall

It remains to putty the seams that are present between the drywall panels. It is necessary that in future paint or other finishing material lay down without problems. The putty is applied to the joints and smoothed very carefully. In the future, the seams still need to be rubbed with sandpaper so that they do not protrude above the plane of the drywall lining. Such a ceiling will be aesthetic and incredibly functional. Withdrawing and depositing go hand in hand with the security of a casino, which is why it is extremely important. Therefore, online casino reviews pay special attention to this. In most cases, the best online casinos out there will allow you to deposit and withdraw funds with all major credit cards and e-wallets, such as PayPal, Neteller, or Skrill, but it is always a good idea to check the payment option that casino offers when reading a review.

Tags: , , , , ,